Vent Silencer
Fire Tube Boilers
Flow Measurement Device
Sampling Cooler
Deaerators
 
 
   

 

  FLOW MEASUREMENT DEVICES
  DESIGN & MANUFACTURING OF FLOW MEASUREMENT DEVICES BASED ON INTERNATIONAL STANDARDS
   
  FAP measurement solutions offer high quality orifice plates & nozzles to meet demanding requirements of both customer and Industrial standards. State of the art manufacturing facilities , a quality assurance based on ISO 9000 , quality control program and skilled craftsmen combine to produce flow measurement devices that meet or exceed all recognized measurement standards. FAP measurement solutions orifice plates are available in 304 or 316 stainless steel and are precision machined and hand polshed to insure accuracy.
   
 
 
        FAP measurement products in field of manufacturing orifice plates are:
     
  1- UNIVERSAL ORIFICE PLATES
FAP orifice plates are dimensioned to standard industrial sizes in order to allow the standardization of orifice plate equipment. Orifice bore of plate can be determined by FAP engineering services dept. based on clients requirements.



2- SQUARE EDGE ORIFICE PLATES
These type of orifice plates are manufactured according to the same tolerances as the universal orifice plates . Orifice bore of plate can be determined by FAP engineering services dept. . based on clients requirements. Plate materials are normally considered in 304 or 306 stainless steel.



3- RING JOINT ORIFICE PLATES EAP
can furnish this type of orifice plates in any API ring sizes and any requested material upon request.
   
 
 
FAP measurement products features in field of manufacturing flow nozzles are:
   
Fap measurement flanged type flow nozzle for insertion between flanges is most commonly used with Pipe wall taps located at one diameter upstream and one half diameter down stream nozzle is centered in pipeline within required tolerances by shoulder behind nozzle flange.
Nozzle flanges are normally furnished for raised face flanges but may be furnished for Other flange facing upon request.
Fap flow nozzles designed in accordance with ASME specifications.
     
   
Line Size
(in)
300# 600# 900# ALL CLASSES
A(in) B(in) A(in) B(in) A(in) B(in) C(in) D(in)
1 2.9 4 2.9 4 3.1 4 1 0.125
1.5 3.8 4 3.8 4 3.9 4 1 0.125
2 4.4 4 4.4 4 5.6 4 1 0.125
2.5 5.1 4 5.1 4 6.5 4 1 0.125
3 5.9 4 5.9 4 6.6 4 1 0.125
4 7.1 4 7.1 4 8.1 4 1 0.125
6 9.9 4 9.9 4 11.4 4 1 0.125
8 12.1 4 12.1 4 14.1 4 1 0.25
10 14.3 4 14.3 4 17.1 4 1 0.25
12 16.6 6 16.6 6 19.6 6 1.5 0.25
14 19.1 6 19.1 6 20.5 6 1.5 0.25
16 21.3 6 21.3 6 22.6 6 1.5 0.375
18 23.4 6 23.4 6 25 6 1.5 0.375
20 25.6 6 25.6 6 27.4 6 1.5 0.375
24 30.4 6 30.47 6 32.9 6 1.5 0.375
     
   
    SQUARE EDGE TYPE ORIFICE PLATE SPECIFlOATION
   


 
 Copyright © 2002 FAP Co  All Rights Reserved
info@fapdec.org


 

About FAPContact  |  Projects  |  Products  |  Managers